Best Crypto Arbitrage Scanners: How to Choose One
Best crypto arbitrage scanners: what to check when choosing one - net spread, withdrawal status, order book depth, data speed. A checklist and worked example.
The best crypto arbitrage scanners show setups you can execute at your trade size after all fees. When choosing one, check five things:
- which strategies the service covers;
- whether it calculates the net spread;
- whether it sees deposit and withdrawal status;
- whether it accounts for order book depth;
- how fast it refreshes prices.
The exchange count in the ad and the subscription price matter less.
Which strategies the scanner covers
Each type of arbitrage needs its own data. A scanner that only compares spot prices is useless if you don't want to move coins between exchanges.
- Cross-exchange spot with a transfer: needs network status, withdrawal fees and confirmation time.
- Spot without a transfer: coins and USDT already sit on both exchanges, so only prices and the order book matter.
- Delta-neutral futures: long on one exchange, short on another. Funding rate, its interval (8 hours on most exchanges, 1 or 4 on some) and liquidity matter.
- Spot-futures (basis): the gap between spot and the perpetual of the same coin.
- Funding carry and hedged staking: income from rates with price risk hedged.
- P2P: buying USDT for fiat on one platform and selling on another. You need real ads that take your amount, banks from one country, limits and payment time.
- New listings: a new coin's price often diverges across exchanges in the first hours.
Decide what you will trade over the next few months and check that the scanner covers exactly that. Then look for your exchanges in its list. A claim of 40 exchanges means nothing if your two are missing. Spot and futures on the same exchange are two separate markets.
VVARB, for example, collects all of these setup types across 40+ exchange markets. In P2P it picks ads that accept your amount and finds chains through USDC, BTC and ETH via spot.
Net spread: the main factor in choosing an arbitrage scanner
The spread on screen is a price difference. Profit is what remains after these deductions:
- taker fees: usually 0.05-0.1% per trade, and you make at least two trades;
- the coin withdrawal fee: about $1 for USDT on TRC-20, more for other coins and networks;
- slippage, when the volume at the best price is smaller than your size;
- price movement during the transfer.
The guide on why a screener spread is not your profit explains where that gap comes from. Check whether the service deducts fees itself and calculates the spread for a specific volume. A 3% setup sitting on $40 of liquidity does not exist for a $1,000 account. The order book depth guide shows how to estimate what size a setup can absorb.
Withdrawal status, networks and duplicate tickers
The largest spreads in basic feeds usually turn out to be false signals. There are three common causes.
- Withdrawal or deposit is closed. The price diverges precisely because the coin cannot be moved. A scanner should show the status on both sides.
- No shared network. Exchange A withdraws the coin on one network, exchange B accepts it on another. The transfer is impossible or needs a bridge.
- Same ticker, different tokens. Two different contracts trade under one name, and the 20-50% spread will never close.
A good service filters these setups out or flags them. A poor one puts them at the top of the list, because their spread is the largest.
Data freshness is easy to test. Open a setup in the scanner and the exchange order book side by side. On a liquid coin, if the service lags by tens of seconds, the signal goes stale before you can enter.
Worked example: checking a 2% setup
The numbers are illustrative. The scanner shows coin X: buy on exchange A, sell on exchange B, spread 2%. Capital is $1,000.
- Gross income: 2% of $1,000 = $20.
- Taker fee of 0.1% on the buy and on the sell: about $2.
- Withdrawal fee from exchange A: $3 in this example.
- Order book on A: only $400 sits at the displayed price. The other $600 fills on average 0.8% higher, which costs $4.80.
- The transfer takes 15 minutes, and the price on B drops 0.5% meanwhile: minus $5.
Result: 20 − 2 − 3 − 4.8 − 5 = $5.20, or 0.52% instead of the 2% on screen. Had withdrawals on A been closed, the setup would not execute at all and the coins would be stuck on exchange A.
If coins and USDT already sit on both exchanges, steps 3 and 5 disappear. You buy and sell at the same moment, and the result is about $13.20. That makes it useful when a scanner lists no-transfer setups separately. A good service shows steps 2-4 right in the setup card. You only decide whether you accept the risk in step 5.
Checklist: what to look for in an arbitrage scanner
| Criterion | What to check | Red flag |
|---|---|---|
| Strategies | spot, futures, basis, funding, P2P | only one setup type |
| Exchanges | your exchanges, spot and futures separately | your exchanges are missing |
| Net spread | trading and withdrawal fees deducted | raw price gap only |
| Depth | calculated for your size | spread on $50 of liquidity |
| Networks | deposit and withdrawal open, shared network | setups on closed withdrawals |
| Tickers | contract address check | 20-50% spreads sitting for hours |
| Freshness | prices match the exchange | numbers frozen for minutes |
| Filters | volume, spread, exchanges, size | an unfiltered feed |
Price and a test before paying
Scanner prices differ several times over, and the same price buys different feature sets. The numbers by service are collected in the crypto arbitrage scanner price comparison. Before a long subscription, run a one-week test:
- write down 10-15 setups the scanner shows for your size;
- for each one, check the order book, withdrawal status and network on the exchange;
- count how many were executable with a net spread above your costs.
If most setups fail the check, the service does not fit your style, however many exchanges it covers. A verified setup still carries risk: frozen withdrawals, network delays, liquidation on futures. The guide on arbitrage risks covers them.
Bottom line
Start your test with setups that need no coin transfer. They have fewer moving parts, so comparing the scanner's data with the exchange order book is simpler. Add transfer setups and futures once the service's numbers match your manual calculations.
Questions and answers
Which crypto arbitrage scanner is the best?
Can I get by with a free scanner?
How many exchanges should a scanner cover?
Does a scanner guarantee profit?
Find trades like these yourself
Staking and listings - a 3-day trial. Other screeners - demos delayed by 6-8 hours.