VVARB
arbitrage terminal
Sign in Sign up
Exchange reviews 6 min read

Binance Review for Arbitrage: Fees, Funding and P2P

Binance review for arbitrage: spot fees 0.1%, futures 0.05%/0.02%, 515 perpetuals with funding, P2P USDT for UAH, KZT, EUR, TRY, PLN, and the risks.

Binance Review for Arbitrage: Fees, Funding and P2P
+40% subscription days for new users

Pay for your first subscription within 24 hours of signing up and get extra days as a gift.

Sign up

A Binance review for arbitrage comes down to three things: fees, funding and P2P. Spot trading on Binance costs 0.1% per trade for both maker and taker. Futures cost 0.05% taker and 0.02% maker. VVARB tracks 515 perpetual contracts with funding on the exchange, plus USDT P2P markets in five currencies.

For an arbitrage trader, the property that matters most is order book depth: an order of a few thousand dollars moves the price less than on mid-sized venues. Current parameters are on the Binance page in VVARB. Below: where the exchange helps a setup, where it gets in the way, and how to price a trade before you enter.

Binance for arbitrage: what kind of venue it is

Binance has been running since 2017 and is the largest exchange by trading volume. It lists thousands of spot and futures pairs, so almost any coin the screener finds on other exchanges is here too. In arbitrage it fills four roles:

  • The deep-book leg in cross-exchange spot. You buy the coin where it is cheaper and sell it on Binance. Slippage on the Binance side is usually smaller.
  • The hedge in delta-neutral setups. The long sits on one exchange and the perp short on Binance. 515 contracts cover most coins.
  • Spot and futures on one exchange. Basis and funding can be collected without moving coins between venues.
  • Fiat on- and off-ramp through USDT P2P markets for UAH, KZT, EUR, TRY and PLN.

Binance fees for arbitrage: spot and futures

VVARB prices setups with these rates:

  • spot: taker 0.1%, maker 0.1%;
  • futures: taker 0.05%, maker 0.02%.

Two practical points follow from these rates:

  • On spot, a limit order costs the same as a market order. Use limit orders to get a better fill price; they do not lower the fee.
  • On futures, the maker rate is 2.5 times lower than the taker rate. Opening and closing a position with limit orders costs 0.04% of volume, with market orders 0.1%.

The 0.1% spot rate sits at the top of the typical 0.05-0.1% range. Say a setup goes through Binance spot and another exchange with the same rate. The two trades eat 0.2%, plus the cost of moving the coin or USDT: a USDT withdrawal on TRC-20 is usually about $1. A 0.3% spread on the screener then becomes 0.1% before slippage.

These are base rates. Yours may differ by account tier, so check it in your account before you run the numbers.

Funding on Binance: 515 perpetuals

Funding is a payment between longs and shorts on a perpetual contract. It is usually charged every 8 hours; the exact interval is in the contract specification. When the rate is positive, longs pay shorts. When it is negative, shorts pay longs.

Traders use Binance funding in three ways:

  • Carry on one exchange. Buy the coin on spot and short the perp for the same size. Price moves cancel out and funding remains. The guide on spot-futures basis explains how to judge the gap between spot and futures prices.
  • Cross-exchange funding. Short where the rate is high and go long where it is low. With 515 contracts, Binance is often one of the legs. Compare rates across venues in the funding and open interest screener.
  • One-off payments right before settlement on contracts with an abnormal rate. The risk is higher here: a high rate rarely lasts long, and these coins move sharply.

On large coins the rate usually stays close to the base level, so carry income is small. High rates show up more often on small contracts, where the book is thin even on Binance.

Worked example: spot + short perp carry on Binance

The numbers are illustrative and rounded. Size: $10,000 per leg.

  • Buy the coin on spot, taker 0.1%: $10.
  • Open the perp short, taker 0.05%: $5.
  • Close: sell the spot for $10 in fees, buy back the perp for $5.
  • Total fees for the round trip: $30.

Funding of 0.01% per period pays $1 on $10,000 per payment. With three payments a day that is $3, so fees are covered in 10 days. At 0.03% you collect $9 a day and break even in a little over three days.

You can open and close the perp with limit orders at the 0.02% maker rate. The futures fee then drops from $10 to $4, and the round trip to $24. At 0.01% funding, break-even shrinks to 8 days.

What the math leaves out:

  • the gap between spot and perp prices at entry and exit, which can add or remove a few dollars;
  • slippage on small coins;
  • a sign flip: if funding turns negative, the short starts paying;
  • capital. Besides $10,000 on spot, you need margin for the short, for example $5,000 at 2x leverage. Calculate the return on $15,000, not $10,000.

P2P on Binance: USDT for UAH, KZT, EUR, TRY, PLN

VVARB tracks five P2P markets on Binance: USDT for Ukrainian hryvnia, USDT for Kazakhstani tenge, USDT for euro, USDT for Turkish lira and USDT for Polish zloty.

The P2P arbitrage loop works like this. You buy USDT for fiat through a bank on one exchange's P2P market, transfer the coins, and sell them on another exchange's P2P market. Binance can be either side. USDT price gaps between venues do appear, but bank restrictions, ad limits and payment windows eat into them.

The P2P arbitrage screener picks real ads that accept your amount and pairs banks from the same country. It checks payment time, limits and minimum withdrawal. When a direct USDT loop does not add up, it looks for chains through USDC, BTC or ETH via spot.

Count the transfer separately. A USDT withdrawal on TRC-20 costs about $1: that is 0.1% of $1,000 and 0.01% of $10,000. On small amounts the transfer takes a visible bite out of the spread.

Binance limits and risks for arbitrage

  • 0.1% on spot for both order types. Narrow spreads through Binance spot do not cover the fees.
  • Reference price. On liquid coins, other exchanges follow the Binance price, so the spread against it is usually small. Setups appear more often on less liquid coins, where the Binance book is thinner too.
  • Withdrawal pauses. Withdrawals on a specific network can be paused for maintenance. The coin then sits between exchanges while the spread closes.
  • Access by country. Available products depend on your country of residence: futures or P2P in your currency may be unavailable.
  • Liquidation. A leveraged short can be liquidated in a sharp rally even when a long on another exchange covers it.
  • Venue risk. Keeping all your capital on one exchange concentrates risk in one place. More in the guide to arbitrage risks and how to reduce them.

Checklist before your first setup through Binance

  • Budget 0.1% for each spot trade on Binance and 0.05% for each futures trade unless you use limit orders.
  • In carry trades, count break-even in days: round-trip fees divided by daily funding.
  • Keep leverage on the short low and leave a margin buffer.
  • In P2P, check the bank, the ad limits and the payment time before the deal.
  • Confirm that withdrawals on the network you need are open on both exchanges.

Questions and answers

What are Binance fees for arbitrage?
VVARB counts spot at 0.1% for both maker and taker, and futures at 0.05% taker and 0.02% maker. Your own rate may differ by account tier, so check it in your account.
Can I do arbitrage inside Binance without transferring coins?
Yes. Funding carry and spot-futures trades are built on one exchange from a spot buy and a perp short. With taker orders, round-trip fees come to about 0.3% of one leg's size, and income depends on the funding rate and the basis.
Which is cheaper for arbitrage on Binance: spot or futures?
Futures are cheaper on fees: 0.05% taker and 0.02% maker versus 0.1% on spot. A futures position needs margin and carries liquidation risk, which a spot position does not.
Which currencies does VVARB cover for Binance USDT P2P arbitrage?
UAH, KZT, EUR, TRY and PLN. The screener picks ads that accept your amount, pairs banks from the same country, and checks payment time, limits and minimum withdrawal.

Find trades like these yourself

Staking and listings - a 3-day trial. Other screeners - demos delayed by 6-8 hours.

Read also